Garland Gate Pros provides professional custom & estate gates in Garland, TX for residential and commercial properties across the Dallas metroplex. An estate entry is a piece of architecture that happens to move. Custom scrollwork, monogram panels, arched top rails and masonry columns are the visible part. What determines whether it looks right in ten years is the relationship between a heavy gate and ground that will not stay put.
Masonry columns are where most estate entries eventually fail, and the reason is subtle. A brick or stone column and the steel gate hanging off it respond differently to a moving footing. The column is stiff and heavy and telegraphs any settlement straight into the hinge line, and once the hinges have been dragged out of alignment, the fix is not on the gate. Homeowners get quoted a new gate when the gate was never the problem.
So we build the column around the gate rather than the other way around. A structural steel core goes in on its own drilled pier, taken below the soil zone that moves, and the masonry is built around that core as cladding. Hinges bolt to steel, never into brick or block. If your existing columns were built the other way, we can often core, sleeve and re-anchor them instead of tearing them down.
Design work happens in our own shop, which means the ornament and the engineering get decided together. Hand-formed scroll, cast elements, pierced panels, arched or cathedral top rails, matched pedestrian gates and fence returns all get drawn against the actual span, weight and wind load rather than picked from a catalog and hoped for. Drawings go to you before any steel is cut, and revisions at that stage are free.
Finishing on an estate gate should outlast the fashion. We hot-dip galvanize the steel and powder coat over it for gates near irrigation or heavy tree cover, or use a multi-stage prime and topcoat where a hand-worked patina is wanted. Batch records get kept so a repair a decade later still matches. A finish chosen for fashion looks dated faster than one chosen for the building.
Sequencing matters more on an estate entry than on any other job we do. The steel cores and their piers go in first, the gates get hung and proved to swing, and only then does the mason clad the columns to the steel that is already carrying the load. Doing it the other way round means the hinge positions are fixed by a bricklayer, and every column that ends up out of plumb becomes the gate fabricator's problem.
We restore as often as we build new. Beautiful old ironwork on failed columns and worn hinges is worth saving, and re-hanging a restored gate on a properly engineered pier costs far less than commissioning its replacement. We will tell you plainly which of the two your entry needs. We will also quote both honestly, so the comparison is yours to make rather than ours to steer.
With 15+ years of experience, our insured team brings the right materials and equipment to every job — wrought iron and ornamental steel fabrication, powder-coated aluminum gates, truck-rated cantilever slide gates, LiftMaster, DoorKing and FAAC operators, Class I-IV operator classifications, UL 325 entrapment protection — and backs the work with a written workmanship warranty. We serve Garland and nearby communities including Richardson, Mesquite, Rowlett, Plano.
What We Handle
Everything our custom & estate gates in Garland covers
One crew, one point of contact, and the full range of custom & estate gates work in Garland, TX. If it is on this list we do it in house rather than handing it to a subcontractor:
- custom estate gates
- ranch entry gates
- luxury driveway gates
- hand-forged entrance gates
- brand and monogram gates
- matching pedestrian entry gates
- stone column and gate packages
- oversized ranch entrances
- custom gate design
- underground gate operators
- gate column conduit sleeving
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Garland services.
Materials, equipment and how we do custom & estate gates
The difference between custom & estate gates that lasts and custom & estate gates that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with wrought iron and ornamental steel fabrication, powder-coated aluminum gates, truck-rated cantilever slide gates, LiftMaster, DoorKing and FAAC operators, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Garland job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of gate work in the Dallas metroplex means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do custom & estate gates outside Garland
Garland Gate Pros covers Garland and the surrounding communities of the Dallas metroplex. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Custom & Estate Gates in Richardson, TX — Dallas County, population 120,000
- Custom & Estate Gates in Mesquite, TX — Dallas County, population 150,000
- Custom & Estate Gates in Rowlett, TX — Dallas County, population 65,000
- Custom & Estate Gates in Plano, TX — Collin County, population 285,000
- Custom & Estate Gates in Sachse, TX — Dallas and Collin Counties, population 28,000
- Custom & Estate Gates in Wylie, TX — Collin County, population 60,000
Start on the Garland Gate Pros homepage for a free estimate, or call (877) 757-4456 and describe the job.
Why Garland Chooses Garland Gate Pros
- ✓Over 15 years installing and automating gates across the Dallas metroplex
- ✓In-house welding shop — we fabricate and coat our own gates rather than reselling panels
- ✓Deep footings engineered for North Texas blackland clay, so gates stay square
- ✓Every operator wired to UL 325 with photo eyes, loop detectors and tested entrapment protection
The standards behind custom & estate gates
Quality here is not a matter of opinion — it is written down. The custom & estate gates work we do in Garland follows published industry standards: DASMA is the standards body for door and access systems, and UL Solutions publishes UL 325, the safety standard for automatic gate operators. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every custom & estate gates project in Garland gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (877) 757-4456 for a free custom & estate gates free estimate in Garland, or request a quote and we'll get right back to you.