About Garland Gate Pros: Gate Pros in TX
Garland Gate Pros has spent over 15 years building, automating, and repairing driveway gates across Garland and the greater Dallas metroplex. We came up out of a welding shop taking on trailer repairs, handrails, and whatever else rolled through the bay, and we still build gates the way a fabricator thinks about them rather than the way a catalog does.
Today we handle custom wrought iron entrances, ornamental steel and aluminum gates, ranch entry gates with pipe and cable fencing, cantilever slides for industrial yards, barrier arms, and access control for gated communities, and every job runs with our own crews.
The part that separates a gate that lasts from one that does not is almost never the gate. It is the footings, the coating, and the operator sizing.
We drill deep footings that get below the seasonal movement in North Texas clay, hot-dip galvanize or powder coat the steel so humidity and rain do not start rust inside the tube, and specify operators to the real gate weight and daily cycle count rather than to the cheapest model that technically fits.
Every operator is wired to UL 325 with photo eyes, loop detectors, and tested entrapment protection. We are licensed, insured, and bonded, a member of the International Door Association, and everything we install carries a written workmanship warranty.
Wrought iron, ornamental steel, aluminum, wood, vinyl, sliding, swing, cantilever, and bi-fold gates, plus operators, keypads, telephone entry, safety sensors, solar power, security fencing, and emergency service. One call, one crew, one company that still answers the phone afterward. Se habla espanol, and the on-site estimate is always free.
If you have a gate project in Garland, the fastest way to get a real number is a free on-site estimate. See every Garland service we handle, check whether we cover Richardson, TX and the rest of the Dallas metroplex, or go back to the Garland Gate Pros homepage to start. You can also reach us directly on (877) 757-4456.
Credentials
- Experience: 15+ years serving the Dallas metroplex
- License: Texas does not license gate installers, and the Department of Public Safety says so plainly: fitting a gate or garage door operator, with the keypads and transmitters that simply open it, is exempt from private security licensing. That exemption ends the moment the system logs entries or ties into an alarm, which requires a DPS company license. We tell you which side yours falls on before you buy.
- Insurance: Fully insured and bonded
- Association: International Door Association member
- Warranty: Written workmanship warranty on every install
How Garland Gate Pros works
How a job with Garland Gate Pros runs, start to finish
Site visit first, always. We measure, look at the real condition of the work area, and ask what you are actually trying to solve — then you get an itemized free estimate in writing with materials, scope and a realistic date on it.
Once the work starts, the same crew stays on the job until it is done. We protect the surrounding area, clean up daily, and tell you the moment something under the surface changes the plan, because the alternative is a surprise invoice and nobody wants that conversation. Written workmanship warranty on every install backs the finished work.
What we will not do
We do not quote a gate job over the phone, take deposits before a written scope exists, or bid work we are not set up to do properly. If your project needs a different trade, we say so and point you at someone who does it well. Losing a job is cheaper than doing one badly in Garland.
Where Garland Gate Pros works and who we work with
Garland, TX first, then the surrounding communities of the Dallas metroplex: Richardson, Mesquite, Rowlett, Plano, Sachse, Wylie, Rockwall, Dallas and more. Each of those has its own page with local detail rather than a copy of this one.
Work splits roughly between homeowners and commercial property — offices, retail, restaurants, apartment complexes and HOA boards across the Dallas metroplex. Start with the Garland services, the Garland Gate Pros homepage, or just call (877) 757-4456.
Why Garland Chooses Garland Gate Pros
- ✓Over 15 years installing and automating gates across the Dallas metroplex
- ✓In-house welding shop — we fabricate and coat our own gates rather than reselling panels
- ✓Deep footings engineered for North Texas blackland clay, so gates stay square
- ✓Every operator wired to UL 325 with photo eyes, loop detectors and tested entrapment protection
- ✓Surge protection standard, because Texas storms kill more control boards than anything else
- ✓Insured and bonded, with a written workmanship warranty
- ✓Se habla espanol
What Garland Customers Say
Built us a dual swing iron gate off the lake road and drilled the footings much deeper than the other bid did. Two seasons of clay movement and it still meets in the middle perfectly.
A storm took out our control board and the gate was stuck open. They came the same afternoon, replaced the board, added surge protection, and reprogrammed all four remotes.
Solar opener on a long driveway with no power run. They sized the panel to how much we actually use the gate instead of guessing. It has not blinked, even in January.
Our HOA call box could not complete calls after the phone line was cut over. They converted it to cellular, rebuilt the directory, and trained our board on the software.
Cantilever gate on our yard was dragging and eating rollers. They shimmed the posts, replaced the roller assemblies, and re-aligned the operator. Trucks go through it all day now.
Cedar slat gate on a steel frame with a hidden underground operator. It looks like a magazine photo and it has not sagged an inch. The crew left the site cleaner than they found it.
Service Areas
Garland Gate Pros serves Garland, TX and surrounding communities including: